AR 168D DRIVER DOWNLOAD

Page 27 Windows logo test or digital signature, be sure to click “Yes”. By pressing ‘print’ button you will print only current page. When [ ] key is pressed, the sequence is reversed. The machine goes to the sub code entry standby mode. Adjust the setting so that the void area is 2 – 4 mm. Sensor Pwb 2 Remove the upper cover. Page 77 – High voltage adjustment Page 78 – B.

Uploader: Mezizshura
Date Added: 19 April 2007
File Size: 61.31 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 28018
Price: Free* [*Free Regsitration Required]

D – S Duplex to Simplex Rotation copy mode: Download is completed with the above procedures.

Drum Transfer charger unit Charger wire B. Voltage added to the screen grid can be selected, high and low. For assembly, reverse the disassembly procedure. Refer to the figure below. Setting up button manager”. For non-installation models, skip. Page 77 – High voltage adjustment Page ra – B. After completion of memory clear, the buzzer After completion of memory clear sounds.

Recent Drivers  LEXMARK Z53 XP DRIVER

Sharp AR-168S Service Manual

Paper Exit Roller 2 Remove the paper feed paper guide upper. Page 26 USB 2. Makes the laser scanning speeds at both ends of the drum same as each other. Enter text from picture: When paper is discharged, the shifter is operated. Duplex Motor Section rspf Model Only End digit of year Version No. Toner remaining on the drum is removed and collected by the cleaning blade.

Td Cartridge Replacement Note: Copy mode without rotation: When assembling, turn it to the right and attach. This a also for: When [ ] key ra pressed, the sequence is reversed.

Only when RSPF is installed.

Sharp AR-168D MultiFunction Printer-Scanner-Copier

Page With the above procedures, installation on Windows ME of the inte- gration maintenance program is completed. After completion of 30sec operation, the operation is turned off with the Bios and the machine goes into the sub code entry standby mode. Disassembly procedure 1 Af four screws, and remove the rear cabinet and the rear cabinet cover.

Recent Drivers  SP8834DT DRIVER

For 25 or less, however, the void amount is regarded as 0. Page After completion of memory clear, the buzzer After completion of memory clear sounds.

SHARP ARS SERVICE MANUAL Pdf Download.

Unpacking 7 Remove the screw 1 pc. Page 87 The smaller the set value is, the lower the speed is. Assembly procedure Page 58 – Manual paper feed section Page 59 – Qr.

With the above procedures, installation on Windows ME of the inte- gration maintenance program is completed. To prevent erroneous detection by disturbing light of a fluorescent lamp, etc.

Pressure plate holder attachment 1 Attach the pressure plate holder so that the resin section is not covered with the seal M1-N.